a constant temperature單語例句
1. After special disinfection treatment, the flags are stored in a room with constanttemperature and humidity.
2. They also stored wine in their extensive cellars, which remain at aconstanttemperature and 80 percent humidity.
3. The egg is cooked at aconstanttemperature of 65 C, making it soft and silky.
4. They live in three pens held at aconstanttemperature, similar to their natural habitat.
5. The temperature of the hot spring in Huangshan Mountain is aconstant 42 degree.
6. The amenity from the constanttemperature massage shower nozzle which pours a large amount of water is enough to wipe away the tiredness of trip.
a constant temperature雙語例句
1.
1. Because the occurrence of interface layers such as SiO_x and silicate at the atternative high k dielectric/Si is a major issure, which may lower the overall dielectric constant. In our experiments, an interface layer was observed enen for a very thin Er_2O_3 film at a very low temperature, which is supposed to attributed to the effect of the Er atom catalytic oxidation effect.
用同步輻射光電子能譜的方法對Er_2O_3薄膜在Si襯底上的初始生長情況作了研究，因為初始生長形成的界面在整個柵介質中起著舉足輕重的作用(界面層的存在會(huì )降低柵介質總的介電常數)。
2.
2. It indicated that a-C: F films deposited at higher microwave power have a better thermal stability. And the films deposited at R. T were mainly composed by CF2 and CF as well as C=C bonding. F is desorbed with C with the form of CFx at lower annealing temperatureand the transformation of the band state of C atom from SP* to SP2 occurs at higher annealing temperature which enhances the C=C bonding of a-C:F film. Thefilms take on amorphous structure even after 400C annealing. There is a close relationship between relative concentration of C=C bond and optical band gap and a lower optical band gap corresponds to a better thermal stability. Both dielectric constantand dielectric loss increased after annealing due to the loss of F and enhanced orientation polarization, respectively.
結果表明，高微波功率下制備的a-C：F膜具有較好的熱穩定性；室溫下沉積的薄膜主要由CF_2和CF鍵和C=C鍵構成，當退火溫度較低時，C與F成分主要以CFx的形式從膜中逸出，當退火溫度繼續升高后，部分SP~3C轉變成Sp~2C，使膜中C=C鍵含量增加；a-C；F薄膜經歷了400℃熱處理后仍為非晶結構；薄膜C=C鍵含量與光學帶隙之間存在密切的關聯，低的光學帶隙對應較好的熱穩定性；退火山氟的逸出導致了介電常數增大，薄膜取向極化的增加使得介電損耗增大。
3. One group of slabs (B1, B3 and B5) was loaded under high temperature after heating to aconstanttemperature. Another group (B2, B4 and B6) was loaded after heating to temperature, holding them at constanttemperature and then naturally cooling to ambient.
第1組板（板Bl，B3，BS）經歷相應時間的升溫及恒溫階段后，進行高溫下加載；第2組板（板B2，B4，B6）經歷相應時間的升溫、恒溫及冷卻階段后，進行高溫后加載。
4. A sensor chip has a piezo-resistive bridge, atemperature resistive bridge, and a multifunctional resistor network that can be used to provide span compensation when operating the piezo-resistive bridge in aconstant current mode.
一種傳感器芯片含有壓敏電阻電橋、溫度電阻電橋和多功能電阻網絡(luò )，該多功能電阻網絡(luò )可以用于壓敏電阻電橋工作在恒電流模式時的量程補償。
5.
5. Use of safe and reliable heat conduction oil heating system to ensure aconstanttemperature of the process of follow-up together, follow-up combined pressure of the pneumatic system by a reliable and guaranteed.
采用安全可靠的導熱油加熱系統，保證覆合過程的溫度恒定，覆合壓力由可靠的氣壓系統提供及保證。
6.
6. Using ancient techniques, aconstanttemperature and humidity can be achieved in the caves all year round, ensuring perfect development of every cheese Emmi produces.
在干酪醬里面是不可缺少的。非常美麗。埃蒙塔爾奶酪既可以切成薄片單獨食用，也可以和蔬菜搭配在一起拌成沙拉。
7. Because there is no constant boiling point and boiling temperature between DMAC and Water has a very large gap, the target of separation can be obtained by the means of rectification. We adopt the way of area, which was suggested by Herrington, to verify thermodynamics coherence.
利用雙循環氣液平衡釜測定DMAC—水氣液相平衡數據，可知該溶液無論文摘要恒沸現象，且兩糾分沸點相井較大，采用精餾法可以達到分離的目的。
8.
8. It is confirmed from fluorescence data that the quenching effect of FBS on the BSA fluorescence is a single static quenching process. The fluorescence quenching data was analyzed using the Stern-Volmer equation and double-logarithm equation. The binding constantand binding sites were 1.04×10 and 1.09 at ambient temperature (26), respectively. It is revealed from the above results that the bonding of FBS with BSA leads to a significant change of the secondary structure of BSA.
按照Stem-Volmer方程和雙對數方程分析處理實驗數據，得到了不同溫度下FBS與BSA反應的結合常數和結合位點數，常溫(26℃)下，分別為1.04×10^5和1.09；實驗結果還表明，FBS與BSA之間的相互作用影響了BSA的二級結構，使其構象發生變化。
9. After many years of efforts and constant innovation, attention to the introduction of advanced engineering and technical personnel, pay attention to digest foreign brand-name products of similar experience, have developed the electric heating, gas burning heating and diesel combustion heating, wood burning heating and other forms of heat-hanging empty tunnel furnace, Automatic transmission chain hanging furnace, with automatic transmission network tunnel furnace, vertical oven, high-temperature heat treatment furnace, hot-melt wax (for a number of tanks at the same time heating), spray paint lines, and various industrial baking Heating equipment.
經過多年的努力，不斷創(chuàng )新，重視引進高級工程技術人員，注意消化國外名牌同類產品經驗，相繼研發出電加熱、瓦斯燃燒加熱、柴油燃燒加熱、木柴燃燒加熱等熱源方式的吊空式隧道爐、全自動吊鏈輸送爐、全自動網帶輸送隧道爐、立式烤箱、高溫熱處理爐、熱熔煲、噴涂烤漆線等各種工業烘烤加熱設備。
10. At present, the usual method of screen is electric aging in which all devices are aged with aconstant power or aconstant current under high temperature and then the early failed devices are selected.
因此，如何正確、方便的檢測半導體激光器的性能、質量并對其可靠性進行評價具有重要的意義。
11. We have constanttemperature experimental apparatus, ultrasonic cleaning machines, high-precision Abbe Refractometer calibration using modern high-precision equipment and testing instruments, has a number of professional and technical high, the practice of high-tech experienced team to forge a solid foundation for enterprise development.
本廠擁有恒溫實驗裝置，超聲波清洗機，高精度校準用阿貝折光儀等現代化高精設備和檢測儀器，有一批專業技術高，實踐經驗豐富的高科技人員隊伍，鑄就企業發展的雄厚基礎。
12.
12. The variable connectivity index is used in the modeling of the physical properties of polymers. A new model is proposed for the heat capacity at constant pressure of solid and liquid polymers at room temperature, which is simple and has good accuracy as well as predictive capability.
率先把可變連接性指數應用于聚合物物理性質的模型化研究中，并對聚合物熱容數據建立了比以前模型結構簡單且精度更高、預測性更好的新模型，促進了種新型指數的廣泛應用。
13.
13. Using a single pulse solar cell tester with constant light intensity for 5ms, we have studied the performance of conventional crystalline silicon solar cell with low concentrator(1～10 sun)and cells temperature of 15～110℃at laboratory.
結果表明，室溫下常規太陽電池的最佳工作點電壓V_m和光功率放大系數a隨入射光強增加呈現先增后降的趨勢，并且串聯電阻小的電池下降速度慢，串聯電阻大的電池下降速度快；溫度對晶體硅太陽電池的工作電壓和輸出功率相當敏感；在嚴格控制太陽電池工作溫度的條件下，串聯電阻小的電池在較寬的聚光范圍內可以獲得良好的使用效果。
14.
14. Dongguan Jian Qiao Equipment Co., Ltd was established for many years, located in Guangdong Province Tangxia Tangxia Town, Dongguan City Industrial Zone on the 30th the first company has been engaged in the electronic testing equipment, environmental test equipment sales services and the development of automatic test system, the main product has: testing machine, furniture testing machine, swing machine, optical quality control testing instruments, wire tester, wear-resistant machine, constanttemperatureand humidity machine, optical image measuring instrument, wire testing machine, office chair repeated impact test machine, a desk drawer repeated testing machine, office chair backrest repeated testing machine, office chairs rotary life testing machine, officelife test machine, plug line hoist swing test, MIT-style folding strength testing machine, tensile testing machine, micro-computers, paper tube compression testing machine, aging test machine, testing machine decolorization extent, resistant to rubbing tester, testing machine embrittlement, sudden pull test machine, testing machine, such as bonding strength.
東莞市劍喬儀器設備有限公司創(chuàng )建多年，位于廣東省東莞市塘廈鎮塘廈第一工業區30號公司一直從事電子測試儀器、環境試驗設備的銷售服務和自動測試系統的開發，主要產品有：試驗機，家具試驗機，搖擺試驗機，光學品管檢測儀器，線材測試儀，耐磨機，恒溫恒濕機，光學影像測量?jì)x，線材試驗機，辦公椅反復沖擊試驗機，辦公桌抽屜反復試驗機，辦公椅反復靠背試驗機，，辦公椅旋轉壽命試驗機，辦公椅腳壽命試驗機，插頭線吊重擺動試驗，MIT式耐折強度試驗機，微電腦拉力試驗機，紙管抗壓試驗機，老化試驗機，脫色程度試驗機，耐揉試驗機，脆化試驗機，突拉試驗機，膠合強度試驗機等。
15. It was found that the activation energy deduced from the modified Arrhenius equation is aconstant independent of temperature.
由修正后的Arrhenius公式計算得到的電導活化能是一個與溫度無關的常數。
16. Results on the evolution of deformation resistance measure by different techniques, like constant strain rate, creep, or stress relaxation, are collected into a convenient and largely material-independent frame of temperature-normalized strain rate against shear modulus-normalized stress.
通過采用不同手段如恒應變速率，蠕變或應力松弛來測量變形抗力的演化，這些結果收集起來放入一個便利的且很大程度上與材料無關的框架中，溫度-標準應變速率相對于剪切模量-標準應力。
17. A microwave resonant cavity based method for wet air humidity measurement is presented in this paper. The calculation model of equivalent dielectric constant of wet air at different temperature and humidity is established. A specially structured resonant cavity with annular grid at its both ends was designed for the humidity measurement of flowing wet air.
提出一種通過微波諧振腔測量氣體介電常數實現空氣濕度連續測量的方法，并給出計算不同溫度和濕度下空氣等效介電常數的模型，設計出作為流動空氣濕度傳感器的兩端采用開放同心圓環結構的特殊結構的諧振腔，對制作的諧振腔進行了氣動特性仿真及S參數測量。
18. The rate of deformation of a sample to stress at aconstanttemperature is known as the creep rate.
試樣在恒溫下的變形與應力之比就是蠕變速率。
19. M at 160K excited at 576nm has three radiative deactivations: One is the strong and fast fluorescence decay with a time constant of 18ps at resonant emission of the J-band (580nm), and its decay time is not almost changed with the temperature; The other two are also fluorescence decay with lifetime of 24ps at 630nm and 60ps at 670nm, respectively.
但變化程度比之于單分子體的而言也是較小的，這兩個熒光退激過程說明分子形成了J型聚集態對其基電子態也有影響。
20. In the extrusion of a certain amount of cases, where extpuded main motor speed constant linear velocity of the compound, the faster the composite layers of thin, hot-melt temperature will drop coated to reduce calories on oilysludge, a drill-molten resin heyly, thus causing a decline in Peel strength.
在擠出量一定的情況下，即擠出主電機轉速不變的情況下，復合線速度越快，則復合層越薄，熱熔膜溫度將會(huì )下降，涂布基材上的熱量減少，熔融樹脂的鉆合力降低，從而也就造成剝離強度的下降。